On this page
- How do drones help with structure fire size-up?
- Using drones at hazmat incidents
- Drones on wildland fires: what fire departments need to know
- Water rescue and technical rescue
- What equipment does a fire department drone need?
- Standards, rules and funding for fire service drone programs
- Which AeroAssist aircraft fit fire service work?
- Frequently asked questions
Key takeaways
- A drone overhead gives the first-arriving officer all four sides of a structure and a thermal view of the roof.
- Thermal reads surface temperature only; it does not see through walls or glass.
- Wildfire TFRs apply to drones, including fire department drones; coordinate with air operations.
- NFPA 2400 (2024 edition) is the standard for public safety drone programs.
- Volunteer departments usually fly under Part 107 rather than the Part 91 public safety waiver.
Fire departments use drones for five main jobs: a thermal size-up of a structure fire before or as the first engine arrives, finding hot spots during overhaul, assessing hazmat scenes from a safe distance, tracking wildland fire behavior, and searching for people in water or difficult terrain. The common thread is information that would otherwise take a ladder, a walk-around or a risky approach to get.
Below is how each mission works in practice, what equipment it needs, and the airspace and policy issues fire agencies need to plan for.
How do drones help with structure fire size-up?
The first-arriving officer's 360-degree walk-around is the foundation of every structure fire. On a large commercial building, a strip mall or a home on a steep lot, a full walk-around can take time the crew does not have, and the back side of the building is often where the problem is.
A drone over the roof gives the officer the whole building at once. In a drone as first responder setup, the aircraft can launch from a dock when the call drops and be streaming before the engine arrives. A useful size-up flight covers:
- A high orbit to show all four sides, exposures, access points and where smoke is showing.
- A thermal pass over the roof to show where heat is concentrated and how it is moving, which informs ventilation and roof operations.
- A look at exposures: neighboring structures, vehicles, fuel tanks, power lines.
- Access and hazards: fences, dogs, hoarding conditions in yards, downed lines, where to stage the aerial.
- A steady overwatch position for incident command once crews are committed, watching for changes in smoke or roof condition.
Thermal cameras read surface temperature. They do not see through walls or glass, so a cool roof surface does not prove the space below is safe. Train operators to describe what the image shows rather than draw conclusions about interior conditions.
Finding hot spots during overhaul
After knockdown, a thermal camera overhead can show residual heat in roofs, attics, eaves and debris piles, and help crews decide where to open up. It is especially useful on large-footprint buildings and on brush fires that have burned into structures, where walking every square foot is slow. Thermal also helps with documentation: a recorded pass at the end of overhaul is a useful record of conditions when the department left.
Timing matters. Thermal contrast is easiest to read once water application has cooled the surrounding surfaces, and harder in direct afternoon sun, when roofing materials heat up on their own. A pass at dusk or after the sun is off the roof often shows more than one at midday, which is worth building into how crews use the aircraft on long overhaul operations.
Using drones at hazmat incidents
At a hazmat scene, every step closer is a decision. A drone with a high-zoom daylight camera can read placards, labels and container markings from a standoff distance, look at the spread of a spill, and watch the plume while the hazmat team plans its entry. Thermal can sometimes show product levels in tanks or temperature differences in containers.
Keep in mind that drones are aircraft, not sensors you can push into a hot zone without thought. Wind, plume direction and the risk of losing the aircraft in the zone all belong in the plan. And note that under 14 CFR 107.36, a small drone flown under Part 107 may not carry hazardous material.
Drones on wildland fires: what fire departments need to know
Drones can map a fire's perimeter, find spot fires ahead of the main front, watch fire behavior at night with thermal, and support structure protection in the wildland-urban interface. Long endurance matters here, since wildland incidents run for hours or days.
Airspace is the hard part. Wildfires often have temporary flight restrictions that require all aircraft not involved in suppression to get permission to enter, and drones count as aircraft, according to the Know Before You Fly campaign. When an unauthorized drone is spotted, fire managers may ground airtankers and helicopters, and people who interfere with firefighting can face civil penalties of up to $20,000 and criminal prosecution. A department's own aircraft must be coordinated with the incident's air operations, and the TFR does not go away just because the drone belongs to a fire agency.
Congress has pushed for better integration. Section 910 of the FAA Reauthorization Act of 2024, "UAS in Wildfires," directs the FAA to improve emergency airspace access response times and develop standardized procedures for drone operations in active fire zones, according to the FAA’s wildfire response page.
Water rescue and technical rescue
Swiftwater, lake and canal rescues are races against time. A drone can follow a victim downstream faster than crews on the bank, show rescuers the safest approach, and, with a release mechanism, deliver a flotation device or a radio. On technical rescues in canyons or on cliffs, an aircraft can find the patient, show the terrain and help plan rope systems before a team commits. Our article on search and rescue drones covers search patterns and night operations in more detail.
What equipment does a fire department drone need?
| Mission | Key sensors and payloads | Endurance need |
|---|---|---|
| Structure fire size-up | Thermal, zoom camera | Short to medium |
| Overhaul hot spots | Thermal with recording | Short |
| Hazmat standoff | High zoom, thermal, laser rangefinder | Medium |
| Wildland | Thermal, zoom, mapping | Long |
| Water and technical rescue | Thermal, zoom, spotlight, payload release | Medium |
Our payload buyer’s checklist walks through each sensor in detail.
Standards, rules and funding for fire service drone programs
- NFPA 2400, the standard for small unmanned aircraft systems used for public safety operations, addresses program development and deployment, minimum job performance requirements for remote pilots and visual observers, and maintenance and recordkeeping, as Occupational Health & Safety reported when it was first issued. The current edition is 2024. It is a practical framework for writing your training and maintenance program.
- FAA authority: career departments that are public aircraft operators can use the Part 91 public safety BVLOS waiver; volunteer departments typically fly under Part 107 with a near-equivalent waiver, per the FAA’s waiver FAQ. Our FAA rules guide explains the difference.
- Funding: FEMA's Assistance to Firefighters Grant is the program most fire departments look at; check the current notice for drone rules. See our funding guide.
Which AeroAssist aircraft fit fire service work?
On our fire and rescue solutions page, we pair the XR-2 Electric Responder with first looks at structure fires and the XR-3 Hybrid Flagship with sustained overwatch and wildland incidents. Both carry a zoom camera, thermal camera and laser rangefinder, as listed on our aircraft page.
Frequently asked questions
How do firefighters use thermal drones?
Firefighters use thermal drones to see where heat is concentrated on a roof during size-up, to find hot spots during overhaul, to track fire behavior at night on wildland incidents, and to search for people. Thermal shows surface temperature, so it complements rather than replaces crew assessment.
Can fire departments fly drones over wildfires?
Only in coordination with the incident. Wildfire TFRs require aircraft not involved in suppression to get permission to enter, and unauthorized drones can force fire managers to ground airtankers and helicopters. Department drones should check in with air operations like any other aircraft.
What NFPA standard covers fire department drones?
NFPA 2400, the Standard for Small Unmanned Aircraft Systems Used for Public Safety Operations. The 2024 edition is the current one. It addresses program development and deployment, job performance requirements for remote pilots and visual observers, and maintenance and recordkeeping.
Can a volunteer fire department get a BVLOS waiver?
Volunteer departments usually do not qualify as public aircraft operators, so they cannot use the Part 91 public safety waiver. The FAA says a near-equivalent BVLOS waiver is available to them under Part 107.
Sources


